The Ultramount’s modular design lends itself to fit just about any reloading press available today. So down the road, if you decide to change presses, or use one Ultramount for multiple presses, all you have to do is swap the top plate to the new press. The new top plates come powdercoated to match and include the required hardware to attach your new press.
Ultramount Micro 4″ has the same beefy 3\16″ thick steel construction as the standard Ultramount, however, Micro is only 4″ tall. Footprint is 9 1/4″ wide by 9″ deep. This base set up is to be used with Inline quick change top plates. You need one top plate per item you wish to swap in and out. Swapping out presses/tools takes less than 30 seconds and requires no tools. Kit includes, legs, quick change base plate and hardware.
Note: With Ultramount Micro being only 4″ tall, press linkages will hang below the benchtop to impede opening of cabinet doors or drawers (If you have them) below your bench. If you have any doubt, before placing an order, measure the linkages hanging down below your bench top and subtract. If you want to have the press completely on top of the bench, the standard 9 5/8″ tall Ultramount will fix you up perfectly.