MCR Bullet Meplat Uniforming Tool 308 Caliber
This tool allows the reloader to remove the unevenness in the nose of the bullet. This results in consistent projectiles, tighter groups, and increased long-range consistency. One-piece, stainless steel tool works for any weight bullet in the assigned calibers to create a burr-free hollow point with no damage done to the bullet. Used by some of the top shooters in the world for 1,000-yard bench rest, high power, and long-range hunting.
Notes: consists of a caliber-specific tool body, a cutter, and a hollow-point deburring tool
Information from the manufacturer:
Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient (B.C.) of any kind of weight bullet. This is done by removing the unevenness of a bullet meplat. (the nose of the bullet) By uniforming the meplat you are reducing the B.C. of that type of bullet by approximately 2%, which is equivalent to less than 1/4 minute of angle sight adjustment. However, you are creating a more consistent projectile, bullet to bullet and shot to shot, thus creating smaller groups. Any inconsistencies in your ammunition are magnified at extended ranges, therefore this process will eliminate one more variable in extreme accuracy reloading.
Montour County Rifles Meplat Uniforming Tool is comprised of a 303 Stainless Steel body, precision machined from one piece to exceptionally tight tolerances for absolute squareness and repeatability. Bullets are held by a taper, caliber specifically bored into the body of the uniform, and then polished so as absolutely NO DAMAGE is done to your bullet. Positively no type of plastic is used, this helps avoid the overall length variances commonly occurring with other types of uniforms that use plastic bodies and/or inserts that expand while holding the bullet.
What sets Montour County Rifles Meplat Uniforming Tool apart from the others is we are the first to utilize the secondary portion of meplat uniforming. When cutting the meat small burrs are pushed inside of the hollow point portion of match bullets. By utilizing the center de-burring tool these burrs can now be removed and an even countersink left in their place. This will remove any inconsistencies in your bullet meplat.
The Montour County Rifles Meplat Uniforming Tool is currently being used by some of the top shooters around the world in 1,000-yard bench-rest, high power, F-class, long-range hunters, and many other facets of shooting. If you are serious about minimizing your groups and having more consistent shot-to-shot accuracy, especially at extended ranges, you simply cannot afford to skip this step.