Ballistic tests for SW4350 S070-05 smokeless gunpowder show it is appropriate for both pistol and rifle cartridges with a near-straight walled case design.

The propellant gas generation rate is appropriate.300 Blackout, 7.62×39,.30-30,.22 Hornet, and many lever-action pistol and rifle cartridges where the rapid transformation from powder to gas is desired. This is a similar burn speed to the Accurate 1680.

Specification:

SW4350 has tremendous capabilities across virtually all long-range class and magnum class centerfire rifle ammunition. Despite SW4350 being an extruded propellant, it exhibits good flow characteristics through a volumetric powder dump.

The grain is narrow and cuts short. The density of SW4350 is approximately 0.9 grams/cc. It is made with a level of flash suppressant. Its extruded geometry is of narrow diameter and cut short. The consistency of its drops when using the volumetric charger is quite consistent for an extruded propellant. The propellant is known by the trade name S070.

SW4350 ammo is a terrific choice for any long-range shooting application. SW4350, despite being an extruded propellant, exhibits good flow characteristics through a volumetric powder dump. The grain of SW4350 is very fine. Its density is about 0.9 grams/cc. It contains a level of flash suppressant. Its extruded geometry is of a narrow diameter and is cut short. Therefore, the dropping consistency of the propellant in a volumetric charger is quite consistent for an extruded propellant. It’s a propellant that is made under the Lovex brand and is called S070.

Warning About Smokeless Powder:

Never exceed the load listed in the reloaders guide. When mixing two or more powders, never mix them. Never substitute another powder for Black Powder or a Black Powder substitute.