Buy Hornady 6mm ARC brass for sale
If you’re looking for Hornady 6mm ARC brass for sale, you can trust the quality and precision of Hornady’s manufacturing process. Hornady is a well-known and respected brand in the firearms industry, and its brass is no exception.
Hornady produces 6mm ARC brass with the same precision, attention to detail, and focus on perfection that has made them a world leader in bullets. They measure their 6mm ARC brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion, and hand-inspect each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed 6mm ARC brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle 6mm ARC brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case of cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance.
On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases, you may notice the case mouths to be slightly belled.
With an all-new rifle with 6mm ARC brass, you should first straighten out the case and case mouth, then chamfer and deburr the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.